Description

Aussiespeed For 289 302 Ford Windsor 4x IDF Weber intake manifold, This manifold is a sand cast inlet manifold that is cast, machined in Australia.

NOTE NEW MODEL AND NEW PHOTOS AVAILABLE APRIL 2021 THERMOSTAT SIDE OF CARB MOUNTING PADS SWUNG FOR FUEL INJECTION

The manifold does not require adapters to bolt carbs or IDF throttle bodies to the manifold as it is machined for them to be bolted straight on.

When the manifold was developed and designed after talking to experienced we got the same feedback that the carbs all face the same way so all tuning and carb changes could be done from one side of the engine and also no complex linkages to set up and keep synchronized.

solid section and under gasket size port faces so the engine builder can get port positioning where they want it.

The manifold can be machined lower to drop the carbs down if required by engine builder.

Available also is part number AS0585 also fits Ford 289/302 Windsor engines and suits IDA weber carbs. 351W Windsor guys we havent forgotten you as an intake for Quad webers is also under development.

AS0302-22