AS0105 Holley 350/500, carb spacer riser 40mm aluminum

AUD $79.00

or 4 fortnightly payments of AUD $19.75 with Afterpay More info


Carburetor spacer block sand cast aluminum 40mm thick can be drilled, tapped or welded it is has a double venture it is open larger on the top and bottom and is smaller in the centre.


Sand cast in a premium grade of aluminum not brittle diecast.The carb spacer can also be drilled and used as a carburetor adapter. The AS0105 can be used with Aussiespeed AS0200 phenolic 2 barrel spacers to increase the height by a further 6mm to 46mm or one on either side will give a total of 52mm.

This is drilled with pilot holes so it can be taped to 5/16 to accept studs or drilled out to fit over 5/16 carb studs.