Ford big 6 owners have been asking for a taller than the standard valve cover. The factory pressed tin cover had an internal height of around 70mm, the tall finned aluminium Aussiespeed valve cover has a height of just over 85mm and also has the advantage of cast in funnel style internal breather shrouds.
This kit has valve cover and sideplate with a polished finish. 5 fin cast fins on the top and thick bolt mounting pads on the base of the cover will stop the cover from twisting or bending. You are purchasing the rocker cover, engine side cover, rocker cover and side cover bolts and washers, pcv valve and chrome push-in cap.
NOTE. It has been brought to our attention that the Ford 240 and 300 engine blocks from 1965 to 1983 are the same and our side plate fits. Engines from 1984 onwards the side plate is narrower and our side cover wont fit. We are working on tooling for the later side plate. Also if running Harland Sharp roller rockers, 25mm of the inner cone style breather needs to be machined off.
DUE TO HIGH DEMAND OUR POLISHED RANGE IS IN LIMITED SUPPLY, THERE COULD BE A DELAY IN SHIPPING.